Pearl-22 Glass Fusing Kiln, 1 Phase
Description
Paragon Pearl-22 Glass Fusing Kiln
The Pearl-22 top lifts away to give access to the shelf area. Air pistons assist in lifting the top. You can place the Pearl on a table without an extra stand. “You can compose directly on the kiln shelf, then close the kiln top,” said glass artist Judith Conway, who uses the Pearl-18 in her Washington, DC studio. “There is no need to balance and carry a heavy kiln shelf from your work table over to your kiln, trying to load the shelf in the kiln while not disturbing the glass pieces in your design.” The elements in the top are mounted in pinless element grooves. Since the groove opening is narrower than the element coil, the elements stay in place without pins. Electrical components are mounted inside the base of the kilns. The Pearl-22 uses the digital 12-key Sentry 2.0 controller.Features of the Pearl-22:
Heating elements in the top of the kiln are mounted in pinless grooves.
¼” heavy duty sheathed Type-K thermocouple
12-key Sentry 2.0 digital controller
Safety switch and pilot light
Air pistons assist lifting the lid.
Louvered switch box
heavy duty wiring
Includes a built-in stand
Specifications:
Max. Temperature: 1700F / 926C
Amps: 30
Phase: 1
Watts: 7200
Nema: 6-30P
Breaker Size: 40
Circuit Wire Size: 10 gauge
UL: N
CE: N
Control Type: Sentry Digital 12-key Non-Ceramic
Voltage: 240
Hertz: 60
Sides: 4
Chamber Volume: 3.64 CU.FT. / 103.07 litres
Chamber Width: 22.00 / 559 mm
Chamber Depth: 22.00 / 559 mm
Chamber Height: 13.00 / 331 mm
Outer Size: 32.00W x 37.00D x 26.00H Inches / 813W x 940D x 661H mm
Ship Size: 36.00W x 40.00D x 38.00H Inches / 915W x 1016D x 966H mm
Ship Weight: 321.00 Lbs. / 145.61 Kg.
Ship Method: This Kiln Ships Via Truck
Contact store for specifications on 200, 208 and 220 volt models"
SKU: Pearl-22
RETAIL PRICE: $2,440.00
OUR PRICE: $2,074.00