Iguana Kiln, 1 Phase
Description
Paragon Iguana
- is powered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interior to a full cone 10.Easy Installation: The 240 volt Iguana plugs into a standard 6-50R outlet, so you can fire it on the outlet most studio kilns already use.
Easy to Load: The Iguana is easy on the back muscles. With the optional 22” stand, the interior floor height is a comfortable 34 ½”. Industrial-gauge elements are seated and protected in dropped, recessed firebrick grooves. The elements are easy to replace, because you can comfortably reach into the kiln.
Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open wide on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat.
The Sentry digital controller is manufactured by Orton Ceramic Foundation. It is unsurpassed in reliability for a controller in its price range. It includes a programmed cool-down, Cone-Fire and Ramp-Hold modes, and is capable of accepting types K, R, or S thermocouples. A type-K thermocouple with an Inconel® sheath comes standard. For your peace of mind, the Iguana includes a switch that shuts off power to the controller when not in use.
Optional Accessories (not included in base price):
22” tall stand
Casters for stand
Door elements
Stainless steel finish
Orton Kiln Master Vent, which mounts to the back of the kiln. Mounting holes are drilled in every Iguana for easy installation.
Iguana Features:
Saves electricity with 3” firebricks Cone 10, 2350°F
Type-K thermocouple with ¼” sheath, or optional type-S Sentry 2.0 controller with programmed cool-down
Two tapered peepholes in the side give a wide view of the interior with little heat loss
Available in 200, 208, 220, 240, 480 volts, 1 & 3 phase
Proportional power elements for more even heating
Heavy-gauge steel completely covers the bottom under the firebricks for extra strength
1 ½” air gap between the switch box and kiln; electrical components stay cool and last longer
Built-in fuse protects the controller
Four hand-lifts
Max. Temperature 2350F / 1287C
Specifications for 240 volt, 1 phase models
Amps: 45
Phase: 1
Watts: 10800
Nema: 6-50P
Breaker Size: 50
Circuit Wire Size: 6 gauge
UL: N
CE: N
Control Type: Sentry Digital 12-key Ceramics
Voltage: 240
Hertz: 60
Sides: 4
Chamber Volume: 4.20 CU.FT. / 118.93 litres
Chamber Width: 18.00 / 458 mm
Chamber Depth: 18.00 / 458 mm
Chamber Height: 22.50 / 572 mm
Outer Size: 36.00W x 31.30D x 60.00H Inches / 915W x 796D x 1524H mm
Ship Size: 42.00W x 34.00D x 68.00H Inches / 1067W x 864D x 1728H mm
Ship Weight: 483.00 Lbs. / 219.09 Kg.
Ship Method: This Kiln Ships Via Truck
Contact store for specifications on other models"
SKU: Iguana, 1Ph
RETAIL PRICE: $2,780.00
OUR PRICE: $2,363.00